一、基本情况
常腾飞，男，汉族，博士，校聘副教授，机制系副主任，硕士研究生导师。主持湖南省教育厅研究项目、校企联合项目、教学改革项目等5项，参与国家自然科学基金面上项目课题研究2项。已发表20余篇高水平论文，授权专利10余项。主讲《机械设计基础》、《机械制造技术基础》等理论课程。
联系方式：立功楼A404E-mail：173770221@qq.com
二、学习工作经历
1. 2020.03-至今湖南科技大学机械设计制造及其自动化系讲师/校聘副教授
2. 2015.09-2019.12中南大学机械工程博士
3. 2011.09-2014.06 湖南科技大学机械工程硕士
4. 2006.09-2010.06 长沙学院机械设计制造及其自动化学士
三、主要研究方向
1. 先进复合材料结构设计和共固化成型工艺开发
2. 难加工材料高品质切削加工技术
3. 多物理场耦合建模仿真方法
四、主持项目
1.湖南省教育厅优秀青年项目，《纤维金属层板层间界面形成机理及仿生微织构强化方法研究》，2024-2026，主持，在研；
2. 横向课题，《大型重载设备越障翻转智能运输平台研发》，2025-2026，主持，在研；
3. 横向课题，《管道插套焊缝智能自动打磨装置研究》，2025-2026，主持，在研；
五、发表论文
[1] Tengfei Chang, Xi zou, Shujian Li, XinyiQiu, Pengnan Li. Investigation of strain history in autoclave process for composite laminates subjected to tool-part interaction using FBG sensors[J]. Polymer Composites, 2025, 0: 1-13. (SCI)
[2]Tengfei Chang, Lihua Zhang, Xi Zou, Shujian Li. Forming quality prediction and evaluation of polymer composite laminates under different autoclave curing pressures based on FBG sensors[J]. Composites Communications, 2025, 58: 102498.(SCI)
[3] Tengfei Chang, Lihua Zhang, Xi Zou, Shujian Li. Resin pressure monitoring method and variation in autoclave processing of polymer composite laminates using capillary sensor[J]. Iranian Polymer Journal, 2024, 33: 25-34.(SCI)
[4] Tengfei Chang, Lihua Zhang, Shujian Li, Yang Pan. Effect of silicone rubber mandrels on the pressure distribution and forming quality of composite hat-joints by co-curing processing[J]. Iranian Polymer Journal, 2023, 32: 325-335.(SCI)
[5] Xi Zou, Tengfei Chang, Zhou Yan, Zi Song Zhao, Yang Pan. Control of thermal strain and residual stress in pulsed-wave direct laser deposition[J]. Optics and Laser Technology, 2023, 163: 109386-109391.(SCI)
[6] 常腾飞,湛利华, 李树健. 基于组合芯模维形传压的复合材料帽型加筋构件固化过程压力分布及成型质量[J]. 复合材料学报, 2023, 40(5): 2609-2620.(EI)
[7] 常腾飞,湛利华, 李树健. 不同成型方法的树脂基复合材料帽型结构共固化成型质量研究[J]. 复合材料科学与工程, 2022, 7: 32-38.
[8] Tengfei Chang,Lihua Zhang, Wei Tan, Shujian Li. Cohesive zone modeling of the autoclave pressure effect on the delamination behavior of composite laminates[J]. Journal of Reinforced Plastics and Composites, 2018, 37(24): 1468-1480.(SCI)
[9] Tengfei Chang, Lihua Zhang, Wei Tan, Shujian Li. Optimization of curing process for polymer-matrix composites Based on orthogonal experimental method[J]. Fibers and polymers, 2017, 18(1): 148-154.(SCI)
[10]Tengfei Chang, Lihua Zhang, Wei Tan, Shujian Li. Effect of Autoclave Pressure on Interfacial Properties at Micro- and Macro-Level in Polymer-matrix Composite Laminates[J]. Fibers and polymers, 2017.18(7): 1614-1622.(SCI)
[11] Tengfei Chang,Lihua Zhang, Wei Tan, Shujian Li. Void content and interfacial properties of composite laminates under different autoclave pressure[J]. Composite interfaces, 2017, 24 (5): 529-540.(SCI)
[12]Shujian Li, Lihua Zhan, Tengfei Chang. Numerical simulation and experimental studies of mandrel effect on flow-compaction behavior of CFRP hat-shaped structure during curing process[J]. Archives of Civil and Mechanical Engineering, 2018, 18(4): 1386-1400.(SCI)
